Tuesday, Nov 17

Tuesday, November 17, 2015

08:00-17:00

Registration

Conference Room 1 (Rm. 1)

Keynote Session II.  Chair: Bohr-Ran Huang

09:00-09:40

Prof. Paul Mayrhofer, Atomistic Guided Development of Hard Thin Films for Severe Applications, Vienna University of Technology, Austria

09:40-10:20

Prof. Jindrich Musil, Flexible Hard Nanocomposite Coatings, University of West Bohemia, Czech Republic

10:20-10:40

Session Break & Poster Installation

Keynote Session III.  Chair: Fu-Hsing Lu

10:40-11:20

Prof. Jeorg Patscheider, Designing the Thermal Conductivity of Hard Coatings-Theory and Experiments, EMPA, Switzerland

11:20-12:00

Prof. Ivan Petrov, Control of Micro- and Nanostructure in Transition Metal Nitrides: Recent Advances, University of Illinois, USA, Linköping University, Sweden

11:00-13:00

Poster Presentation II: Symposium B, D, and E

12:00-13:00

Lunch & Poster Installation

14:30-16:30

Poster Presentation III: Symposium C and F

Conference Room 1 (Rm. 1)

Symposium C: Semiconductor and Optoelectronic Films

Session C3.  Chair: Ching-Ting Lee, Shyankay Jou

13:00-13:25

Invited C3, Ching-Ting Lee, High Stability quinary InGaZnAlO thin films and thin-film transistors deposited using vapor cooling condensation system, National Cheng Kung University, Taiwan

13:25-13:40

Oral C12, Tzu-Wei Huang, Luminescence of Eu-doped ZnO films grown by magnetron sputtering, Ming Chi University of Technology, Taiwan

13:40-13:55

Oral C13, Nan-Ming Lin, High-power GaN-based Light-emitting diodes with double anti-reflective ITO/GZO contact, National University of Tainan, Taiwan

13:55-14:10

Oral C14, Chia-Wen Chang, Characterization of Secondary Phases in Cu(In,Ga)S2 Films, Industrial Technology Research Institute, Taiwan

14:10-14:25

Oral C15, Chien-Wei Huang, Nanoindentation of transparent conductivey ZnO film on flexible PET substrate, National Sun Yat-Sen University, Taiwan

14:25-14:40

Oral C16, Amira Ahmed, Structural, optical, electrical, and mechanical properties of Ga:ZnO and In:Ga:ZnO thin films grown in room temperature and with substrate heating - a comparative study, Bilkent University, Turkey

14:40-15:00

Session break

Session C4.  Chair: Tae-Yeon Seong,  Bohr-Ran Huang

15:00-15:25

Invited C4, Tae-Yeon Seong, Ways of improving the output power of InGaN-based light-emitting diodes, Korea University, Korea

15:25-15:40

Oral C17, Min-Yi Chen, Simple stiochiometric Ti-O thin film for TFT channel layer, Feng Chia University, Taiwan

15:40-15:55

Oral C18, Chadrasekhar Loka, Nanostructured metal-insulator-metal (Ag(Cr)/SiOxNy/Ag(Cr)) coatings for touch-screen display panels, Kongju National University, Korea

15:55-16:10

Oral C19, Anup K. Sahoo, Optimizing rf sputtering deposited amorphous indium galliuim zinc oxide films for liquid crystal alignment, Chang Gung University, Taiwan

16:10-16:25

Oral C20, Hong-Ying Chen, The Mg-doped CuCrO2 thin films prepared by a novel annealing process, National Kaohsiung University of Applied Sciences, Taiwan

16:25-16:40

Oral C21, Chien-Hsun Chu, Influences of Ni thickness on the structure and optoelectrical properties of AZO/Ni/AZO multilayer films by rf magnetron sputtering and electron beam evaporation, National Cheng Kung University, Taiwan

16:40-16:55

Oral C22, Mochamad Januar, The Electrical and Optical Properties of Hafnium-Oxide Dielectric Films Deposited by Reactive High-Power Impulse Magnetron Sputtering, Chang Gung University, Taiwan

18:30-21:30

Conference Banquet

   

Conference Room 2 (Rm. 2)

Symposium G: General Subjects Related to Thin Films and Coatings

Session G3.  Chair: Chun Huang

 

 

13:00-13:15

Oral G13, Yu-Jie Deng, Characterization of Luminescent Downshifiting Sub-Micron Scale Eu2+ Phosphors Particles Deposited on Planar and Textured Si Solar Cells, National Taipei University of Technology, Taiwan

13:15-13:30

Oral G14, Magdaleno R. Vasquez Jr., Effect of plasma treatment on surface morphology and optical properties of low-density polyethylene sheets, University of the Philippines-Diliman, Philippines

13:30-13:45

Oral G15, Kuo-Hsiu Wei, In-situ Nitrogen Treatment Effect on W Growth by Atomic Layer Deposition, TSMC, Taiwan

13:45-14:00

Oral G16, Chi-Wei Huang, Synthesis of bio-inspired organic/inorganic multilayer coatings using a hybrid sputtering and pulsed laser deposition technique, National Tsing Hua University, Taiwan

14:00-14:15

Oral G17, Zdenek Remes, Preparation and optical properties of nanocrystalline diamond films for the infrared planar waveguides, Institute of Physics of the Czech Academy of Sciences, Czech

14:15-15:00

Session Break

Session G4.  Chair: Dong-Hau Kuo

15:00-15:15

Oral G18, Fedor Klimashin, Experimental and computational studies on Mo–N, Technische Universität Wien, Austria

15:15-15:30

Oral G19, Varvara Yu. Gordeeva, Marangoni effect in thin films of water, Perm State Humanitarian Pedagogical University, Russia

15:30-15:45

Oral G20, Yung-Sen Lin, Effects of O2 gases addition on enhanced lithium ion intercalation and conduction of flexible-transparent-lithiated tantalum oxide thin films by an atmospheric pressure plasma jet, Feng Chia University, Taiwan

15:45-16:00

Oral G21, Shao-En Hong, Coating Performance for 3D printing Reflector, Hsiuping University of Science and Technology, Taiwan

16:00-16:15

Oral G22, Christine Mae Quezada, Hydrothermal Synthesis of BaZnO2 Thin Films and an Investigation on its Piezoelectric Properties, National Cheng Kung University, Taiwan

16:15-16:30

Oral G23, Cheng Hsuan Kuo, Fabrication of ZnSnN2 Composition Spreads for Photoelectrochemical Applications, National Cheng Kung University, Taiwan

16:30-16:45

Oral G24, Wen-Chung Lu, A Combinatorial Study of Density Gradient TiO2-rGO Nanorod Nanocomposites for Photocatalytic Applications, National Cheng Kung University, Taiwan

16:45-17:00

Oral G25, Türkan Bayrak, The effect of postdepostion annealing on structural, optical and electrical charcateristics of amorphous SrTiOx thin films deposited by RF Magnetron Sputtering at RT., Bilkent University, Turkey

18:30-21:30

Conference Banquet

 

 

Conference Room 3 (Rm. 3)

Symposium B: Nanostructured and Nanocomposite Coatings

Session B2.  Chair: F-H Lu & Prof. M-T Lin

13:00-13:25

Invited B2, Richard Chromik, Cold sprayed coatings for tribology applications – friction, wear and third bodies, McGill University, Canada

13:25-13:40

Oral B5, Yugandhar Bitla, Fabrication and characterization of wurtzite based heterostructures, National Chiao Tung University, Taiwan

13:40-13:55

Oral B6, Tsu-Yi, Fu, Direct View of silicon initial growth on metal surfaces, National Taiwan Normal University, Taiwan

13:55-14:10

Oral B7, Ming-Tzer Lin, The Mechanical Properties Measurement of Al, Al-Mg and TiN Thin Film using Bulge Testing, National Chung Hsing University, Taiwan

14:10-14:25

Oral B8, Shan-Chun Chang, Characterization of Zr–Si–N coatings prepared using direct current magnetron co-sputtering, National Taiwan Ocean University, Taiwan

14:25-14:40

Oral B9, Jan Lancok, Optical and structural properties of metal napoarticles fluoride nanocomposites thin films fabricated by hybrid deposition, Institute of Physics, Academy of Sciences of Czech Republic,Czech Republic

14:40-15:00

Session Break

Symposium D: Tribological and Protective Coatings

Session D2.  Chair: Yin-Yu Chang

15:00-15:25

Invited D2, Guenter Mark, Superimposed Pulse Power-Technology applicable, Melec GmbH, Germany

15:25-15:40

Oral D6, Yu Tung Hsu, Improvement of Surface Properties of LZ91 Magnesium Alloy by Micro Arc Oxidation Coating, National Taiwan University, Taiwan

15:40-15:55

Oral D7, Kung-jeng Ma, Preparation of Low Friction and Wear Resistant Ceramic Composite Layer on Aluminum Alloy by Micro-arc Carburization Method, Chung Hua University, Taiwan

15:55-16:10

Oral D8, Tseng-Chang Tsai, Functionalized Hydrocalite Film for Improving The Anti-Alkaline Corrosion Resistance of Aluminium, National University of Kaohsiung, Taiwan

16:10-16:25

Oral D9, Tai-Cheng  Chen, Wear Behavior of Thermally Sprayed Al, ZnAl and Inconel 625 Coating on Carbon Steel, Institute of Nuclear Energy Research, Taiwan

16:25-16:40

Oral D10, T. H. Li, Effect of metallic glass thin film coating on the fatigue-properties improvement of 7075-T6 aluminum alloy, National Central University, Taiwan

16:40-16:55

Oral D11, Rakesh Kumar Gunda, Effect of solid lubricant on friction and wear behaviour of hard sliding material, BITS Pilani Hyderabad Campus. India

18:30-21:30

Conference Banquet

 

 

Conference Room 4 (Rm. 4)

Symposium A: Coatings for Sustainable Energy

Session A2.  Chair: Tzung-Fang Guo, Yuan-Chang Liang

13:00-13:25

Invited A2, Tzung-Fang Guo, Preparations of nickel oxide electrode interlayer in CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells, National Cheng Kung University, Taiwan

13:25-13:40

Oral A5, Yang Mulong, Deposition and I-V hysteresis of CH3NH3PbI3 perovskite planar heterojunctioned solar cells, National Cheng Kung University, Taiwan

13:40-13:55

Oral A6, Ing-Song Yu, Rare Earth-doped Down Converter Layer for Crystalline Silicon Solar Cells, National Dong Hwa University, Taiwan

13:55-14:10

Oral A7, Yu-Tang Shen, Performance Enhanced of Planar Si Solar Cell using Two Luminescent Downshifiting Eu2+ Phosphor-Particles, National Taipei University of Technology, Taiwan

14:10-14:25

Oral A8, Ashwini Rohom, The effect of the rapid thermal annealing on the properties of CuInSe2 thin films deposited by electrodeposition technique, Savitribai Phule Pune University, India

14:25-14:40

Oral A9, Priyanka Londhe, One step electrodeposition of CuInGaSe2 thin films from non-aqueous bath for solar cell, Savitribai Phule Pune University, India

14:40-15:00

Session Break

Session A3.  Chair: Kuei-Hsien Chen, Jih-Jen Wu

15:00-15:25

Invited A3, Hironori Katagiri, Pioneering Achievement of CZTS Thin Film Solar Cells, National Institute of Technology, Nagaoka College, Japan

15:25-15:50

Invited A4, Kuei-Hsien Chen, Cu2ZnSnS(Se)4 Films for Energy Applications, Academia Sinica, Taiwan

15:50-16:05

Oral A10, Cheng-Ying Chen, The Back Contact Modification in High Efficiency Cu2ZnSn(S,Se)4 Solar Cells by a Thin MoO3 Layer, National Taiwan University, Taiwan

16:05-16:20

Oral A11, Venkatesh Tunuguntla, Non-toxic Sol-Gel Spin Coated Cu2ZnSnS4 Absorber Layer for High Open Circuit Voltage Solar Cells, Academia Sinica, Taiwan

16:20-16:35

Oral A12, Wei-Chao Chen, Soft thermal processing of CZTSSe/CdS hetero-junction interface for solar cell efficiency improvement, National Tsing-Hua University, Taiwan

16:35-16:50

Oral A13, Hao Yang, Modification of TiO2 powder via atmospheric dielectric barrier discharge treatment for high performance lithium-ion battery anodes, National Tsing Hua University, Taiwan

16:50-17:05

Oral A14, Soonwook Hong, Yttria-stabilized Zirconia Thin Film with Restrained Columnar Grains for Oxygen Ion Conducting Electrolytes, Hanyang University, Korea

18:30-21:30

Conference Banquet

 

 

Conference Room 5 (Rm. 5)

Symposium F: Metallic Coatings

Session F2.  Chair: Yu-Lin Shen

13:00-13:25

Invited F2, Yu-Lin Shen, Mechanical characterization and analysis of metal-ceramic multilayer coatings, University of New Mexico, New Mexico

13:25-13:40

Oral F6, Md. Arifur Rahman, Interfacial microstructures and mechanical properties of molten Sn reacting with Ni-xP films, Yuan Ze University, Taiwan

13:40-13:55

Oral F7, Ching An Huang, Tensile fracture behavior of high-carbon tool steel (AISI 1090) after Ni and Cr-C/Ni coatings, Chang Gung University, Taiwan

13:55-14:10

Oral F8, Chun-Yi Li, Highly conductive and stretchable thin films with high electromagnetic interference effectiveness, National Taiwan University, Taiwan

14:10-14:25

Oral F9, Tung-Yuan Yung, The corrosion behaviours of thermal spray coatings on carbon steel in a saline environment, Institute of Nuclear Energy Research, Taiwan

14:25-14:40

Oral F10, Dongfang Zhang, A comparative study on corrosion behaviors of Al, Ti, Zr and Hf metallic coatings deposited on AZ91D magnesium alloy, Xiamen University of Technology, China

14:40-15:00

Session Break

Symposium E: Organic and Biological Coatings

Session E2.  Chair: Jang-Hsung Hsieh

15:00-15:25

Invited E2, Masahiro Yoshimura, Fabrication of Functionized Graphene Ink by Soft Processing, Taiwan

15:25-15:40

Oral E6, Yi-Chih Lin, Biocompatibility of porous TaOxNy films with various O/N ratio, Ming Chi University of Technology, Taiwan

15:40-15:55

Oral E7, Chun Fu Lin, The Characteristics of MgO Sensing Membrane applied in Electrolyte-Insulator-Semiconductor after Rapid Thermal annealing in O2 ambient, Chang Gung University, Taiwan

15:55-16:10

Oral E8, Jung-San Chen, Anti-Protein Adsorption Capability of Silicone Contact Lenses Grafted with PEGMA Polymer Brushes by Atmospheric Plasma-induced Copolymerization, Ming Chi University of Technology, Taiwan

16:10-16:25

Oral E9, Yin-Yin Wang, Preparation of Large Area Fluorographene by Low Damage XeF2 Plasma Treatment, Ming Chi University of Technology, Taiwan

16:25-16:40

Oral E10, Yu-Hsuan Wei, Enhanced electrochemical sensitivity of electrochemical deposited platinum nanocubes with applications in non-enzymatic glucose sensing, National Tsing Hua University, Taiwan

16:40-16:55

Oral E11, Y. T. Lee, Application of Plasma Polymerized Polypyrrole Thin Films for Drug Release, National Yang Ming University, Taiwan

16:30-16:45

Oral E12, Pei-Hua Tsai, Effect of coating thickness on the Cutting sharpness and durability of Zr-based metallic glass thin film coated surgical blade, National Central University, Taiwan

16:55-17:10

Oral E13, Kelvin Yeung, Magnesium Plasma Modified Bone Allograft for Bone Tissue Regeneration, University of Hong Kong, China

18:30-21:30

Conference Banquet